Digivation Hack Central

The watts clever envi has a USB serial adapter which is a Prolific pl2303. When inserted it is assigned /dev/ttyUSB0 by udev, among a few other symlinks. I have now obtained an RS485 serial adapter on ebay for A$13.98 delivered which uses the exact same chip, which makes it indistiguishable from the envi’s port. What I needed was a way to guarantee uniqueness regardless of the enumeration order on boot or random hot plugin. Naturally, this is for the Aurora GCI which will be installed when they become available in May.

Researching udev a bit, I found /lib/udev/rules.d/60-persistent-serial.rules (mine is a debian system). This file shows how the standard symlinks are done. Since each USB port is unique, I should be able to use that uniqueness to map another symlink to the device.

Firstly plug in the device in the chosen USB port and issue
udevadm info --query=all --name=/dev/ttyUSB1

This shows a heap of stuff but mainly we are interested in
P: /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1:1.0/ttyUSB1/tty/ttyUSB1

Create a file in /etc/udev/rules.d/70-persistent-serial.rules which contains

#see /lib/udev/rules.d/60-persistent-serial.rules

ACTION!=”add|change”, GOTO=”persistent_serial_end”
SUBSYSTEM!=”tty”, GOTO=”persistent_serial_end”
KERNEL!=”ttyUSB[0-9]*|ttyACM[0-9]*”, GOTO=”persistent_serial_end”

IMPORT=”usb_id –export %p”
#IMPORT=”path_id %p”

ENV{ID_SERIAL}==”", GOTO=”persistent_serial_end”

# usb nearest ethernet connector
ENV{DEVPATH}==”*usb2/2-2/2-2:1.0*”, SYMLINK+=”serial/by-name/envi”
#bottom front connector
ENV{DEVPATH}==”*usb7/7-1/7-1:1.0*”, SYMLINK+=”serial/by-name/rs485″
# usb below nearest ethernet connector
ENV{DEVPATH}==”*usb2/2-1/2-1:1.0*”, SYMLINK+=”serial/by-name/rs485″

LABEL=”persistent_serial_end”

Replug and voila you get /dev/serial/by-name/rs485 which will always be the correct device.

Now I just have to run the wire to where the GCI will be installed.